仅供学习参考之用，工程应用、科研生产请购买正版标准。欢迎在文后发表你对本标准的观点。
1 范围
本标准适用于对钢铁材料提供防腐蚀保护，而在其表面热喷涂锌、铝及其合金涂层。
本标准涉及用于常规防腐蚀保护目的的热喷涂锌、铝及其合金涂层的性能表征和相关试验方法。
本标准首先给出了相关定义、分类和与厚度相关联的标记代号;然后涉及表面预处理、涂层应用及厚度、外观和附着力等特性;最后给出了检测这些特性的试验方法。
若供需双方协商认可，本标准的条款对其他金属涂层也有效。
2 规范性引用文件
下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改单)适用于本文件。
ISO 1463金属和氧化物覆盖层厚度测最显微镜法(Metallic and oxide coatings-Measurement of coating thickness-Microscopical method)
ISO 2064:1996金属和其他无机覆盖层关于厚度测量的定义和一般规则(Metallic and other inorganic coatings-Definitions and conventions concerning the measurement of thickness)
ISO 2178磁性幕体上非磁性覆盖层覆盖层厚度侧量磁性法(Non-magnetic coatings on magnetic substrates-Measurement of coating thickness-Magnetic method)
ISO 8501-1涂覆涂料前钢材表面处理。表面清洁度的目视评定第1部分:未涂理过的钢材表面和全面清除原有涂层后的钢材表面的锈蚀等级和处理等级(Preparation of steel substrates beforeapplication of paints and related products-Visual assessment of surface cleanliness-Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings)
ISO 11124一应用涂装及其他相关产品前钢材表面预处理喷砂用金属磨料的技术要求第2部分:冷硬铸铁砂(Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives-Part 2: Chilled-iron grit)
ISO 11126-3应用涂装及其他相关产品前钢材表面预处理喷砂用非金属磨料的技术要求第3部分:铜精炼渣(Preparation of steel substrates before application of paints and related products-Specifications for non-metallic blast-cleaning abrasives-Part 3: Copper refinery slag)
ISO 11126-4应用涂装及其他相关产品前钢材表面预处理喷砂用非金属磨料的技术要求第4部分:煤炉渣(Preparation of steel substrates before application of paints and related products-Specifi-cations for non-metallic blast-cleaning abrasives-Part 4: Coal furnace slag)
ISO 11126-7应用涂装及其他相关产品前钢材表面预处理喷砂用非金属磨料技术要求第7部分:混合氧化铝(Preparation of steel substrates before application of paints and related products-Specifications for non-metallic blast-cleaning abrasives-Part 7:Fused aluminium oxide)
ISO 12944-1色漆和清漆防护涂料体系对钢结构的防腐蚀保护第1部分:综述(Paints and varnishes-Corrosion protection of steel structures by protective paint systems-Part 1: General in-troduction)
ISO 12944-2色漆和清漆防护涂料体系对钢结构的防腐蚀保护第2部分:环境分类(Paints and varnishes-Corrosion protection of steel structures by protective paint systems-Part 2: Classifi-cation of environments)
ISO 12944-3色漆和清漆防护涂料体系对钢结构的防腐蚀保护第3部分:设计要素(Paints and varnishes-Corrosion protection of steel structures by protective paint systems-Part 3:Designconsiderations)
ISO 12944-4色漆和清漆防护涂料体系对钢结构的防腐蚀保护第4部分:表面类型及表面预处理(Paints and varnishes-Corrosion protection of steel structures by protective paint systems-Part 4:Types of su汀ace and surface preparation)
ISO 12944-5:1998色漆和清漆防护涂料体系对钢结构的防腐蚀保护第5部分:防护涂料体系(Paints and varnishes-Corrosion protection of steel structures by protective paint systems-Part 5:Protective paint systems)
ISO 12944-6色漆和清漆防护涂料体系对钢结构的防腐蚀保护第6部分:实验室性能试验方法(Paints and varnishes-Corrosion protection of steel structures by protective画nt systems-Part 6:Laboratory performance test methods)，
ISO 12944-7色漆和清漆防护涂料体系对钢结构的防腐蚀保护第7部分:涂装作业与监督(Paints and varnishes-Corrosion protection of steel structures by protective paint systems-Part 7:Execution and supervision of paint work)
ISO 14919:2001热喷涂火焰和电弧喷涂用线材、棒材和芯材分类和供货技术条件(Thermal spraying-Wires, rods and cords for flame and arc spraying-Classification-Technical supply conditions)
